New Maple IDE release today, direct links below!
This is notable as our first Mac OSX 10.6 release (finally!), and hopefully the last version before a stable and consistent 0.1.0 release. Other changes include getting rid of “HardwareUsb” (use the already-instantiated “SerialUSB” instead), a much more robust reset scheme (including a DFU search period that should fix timing issues many people were having), and a “less blocking” Serial-over-USB implementation.
Note that for the first program upload with with this new release you may have to put your Maple in “perpetual bootloader mode” by holding the BUT button immediately after releasing the RESET button; you would only have to do this once. More details in the linked forum post linked at the bottom.
- Windows XP 32-bit: http://static.leaflabs.com/pub/leaflabs/maple-ide/maple-ide-0.0.5-windowsxp32.zip
- Linux 32-bit: http://static.leaflabs.com/pub/leaflabs/maple-ide/maple-ide-0.0.5-linux32.tgz
- Linux 64-bit: http://static.leaflabs.com/pub/leaflabs/maple-ide/maple-ide-0.0.5-linux64.tgz
- Mac OSX 10.6 32-bit: http://static.leaflabs.com/pub/leaflabs/maple-ide/maple-ide-0.0.5-macosx-10_6.dmg
We tested on all the computers we had around the office but there are tons of details and incompatibilities out there, please let us know in the forums if you have any problems! I’ll kick things off with some known issues in this thread.
Have a great weekend, and happy hacking!
on June 16, 2010 at 12:13 pm
Permalink
“SerialUSB” is that a virtual com port using the usb? Can it transmit at higher than phisical com port speed like the teensy++ design? Their is example code in c that shows how to do it.
If this could transmit virtual com port info at the same rate as the avr teensy++ I would buy 2 boards today.
on July 8, 2010 at 8:53 am
Permalink
This has been a long time in the making, but now hopefully some people (myself included) will be able to buy and try one of your fabulous boards! Thanks for your hard work on getting the Mac software released!